When it comes to playing songs, watching videos, or speaking clearly in calls, the speakers on your iPhone play a vital role. Clear sound is not possible on your iPhone when the speaker is covered in dust. At that moment, everyone was feeling very annoyed.
Learning how to clean iPhone speakers may be necessary if the audio quality on your iPhone isn’t as good as it used to be. It’s not uncommon for us to spend time cleaning the screens of our iPhones or giving the clear phone case a once over.
If you are experiencing the same issue, don’t be concerned. I am interested in providing you with a few straightforward methods. The solution to this problem is easy to achieve by following these steps. There is no need for you to go to a repair shop or take care of this. At home, it’s easy to clean your iPhone speakers
Follow these Steps to How to clean iphone speaker easily
Depending on what you have at home, there are several methods you can use to get water out of your iPhone speaker. We will discuss all of them here with you.
- Use a soft bristled brush or toothbrush
If you’re unable to hear the sound on your iPhone, you can try brushing the speaker ports gently with a brush that has a soft bristle.
To avoid damage, ensure that the brush you use is soft-bristled, clean, and dry. It’s advantageous to use paint brushes or makeup brushes for this.
Start with the receiving speaker, brush gently from side to side, angling to ensure dust is brushed out instead of pushed in. Repeat this process on multiple occasions, tapping the brush to remove any extra dust in between strokes.
You have the option to clean the lower speaker holes near the charging port by using a soft-bristled brush. Gently insert the bristles into the holes, rotate them with softness, then remove them to remove any dust or debris.
- Use a toothpick carefully
It’s possible to use toothpicks for this task, but you should be cautious because they can damage the internals if used incorrectly. This is why it’s best to try this method at your own risk. Only use toothpicks on the lower speakers near the charging port if there is a clear indication that they are blocked.
If necessary, remove your phone case and make sure to have your flashlight ready to help you better see what you’re doing. Place the sharp end of a wooden or plastic toothpick into the speaker holes with care. Do not apply pressure while doing this, and do not push further until you feel resistance.
While pulling it out, tilt the toothpick slightly sideways and up until it flicks the debris out. To prevent damage, it’s important to avoid tilting it down.
- Use a small air blower
Some websites advocate the use of compressed air to clean iPhone speakers, but it can easily cause damage. To make things safer, it’s best to use an air blower like the Soft Tip Silicone Super Air Blower. After using one of the above methods, this can be used to remove any excess dust.
Use short bursts of your air blower to remove dust and debris while holding it a short distance from the speakers. Although it won’t be as strong as compressed air, that’s a positive thing. To increase its effect, bring your air blower closer if necessary. Check on the progress with your flashlight and repeat if necessary.
- Use painterโs tape
Painter’s tape or masking tape are both popular methods. Compared to other types, this tape is weaker and won’t leave any residue on your phone.
- Cut off a small portion and roll it into a cylindrical shape, exposing the sticky side. The diameter of the cylinder should be approximately the width of your index finger.
- Wrap the tape around your index finger, and then insert it into the speaker on your iPhone.
- The tape is meant to catch all the grime and bits that have accumulated in the speakers.
- Ensure that you inspect the tape’s surface after each application. If you notice any lint or grime stuck, take off the tape that was used, roll another small cylinder, and repeat.
- Use sound wave
As a sound wave to fix your speaker volume. When you need to clean your speaker from inside or want to remove water from the speaker you need a speaker cleaner sound which you can easily find at fix my speaker. It will really help you in water ejecting.
- Use Blu-Tack
Blu-Tack’s strong and sticky material allows it to collect dirt and debris from iPhone speakers more effectively than painter’s tape. In order to achieve the best results, adhere to these guidelines:
Make sure that the Blu-Tack fits the speaker holes by rolling it.
Gently insert it into the speaker grille.
Allow it to stay in place for a short period of time to collect dirt and debris.
To remove the collected particles, slowly pull it away.
The speaker is cleaned thoroughly without any debris being pushed further into it by this method. If you find that the dirt and debris haven’t been completely cleared, apply a new or clean Blu-Tack and repeat the process.
It’s important to be careful not to apply too much pressure, as it can result in damage to the speaker grilles.
Troubleshooting iPhone Volume Issues
Make certain that silent mode is not activated. In case you are unable to hear sound from your iPhone’s speakers, double-check to ensure that you have not accidentally switched on silent mode.
Take out the case if your speaker is muffling. The speakers could be muffling or restricting their ability to make sound if your iPhone is in a case. Remove the phone case and try to play music or sounds.
Boost the volume. In the Control Center, it’s easy to raise the volume of your iPhone’s speaker.
If the sound problems persist after cleaning your iPhone speaker and adjusting the volume, reboot your iPhone.
Check to make sure your iPhone speakers are working.
Using either plugging in or Bluetooth, connect your headphones. Your speakers may be faulty if you can hear music through them but not when they’re disconnected.
After disconnecting plugging in or Bluetooth, If you’re able to hear a noise, even though it’s distorted, it could be a sign of luck.
What’s Apple’s official advice?
- Dispose of all screen protectors, films, or cases from your device.
- Examine the speaker’s opening to determine if it’s blocked or dirty. Make certain that the receiver is free of obstructions or dirt on the iPhone only.
- In the event that it’s necessary, use a small, soft-bristled brush to clean the speaker or receiver opening. It’s important to ensure that the brush is clean and dry.
- Go to Settings > Sounds (or Settings > Sounds & Haptics) and drag the Ringer and Alerts slider back and forth a few times. If you are unable to hear any sound or if the speaker button on the Ringer and Alerts slider is dimmed, it may be necessary to have your speaker repaired.
- If you possess the ability to hear sound, attempt to make a call on your iPhone by turning on the speakerphone. Make a FaceTime call on an iPad or iPod touch. If you’re still unable to hear anything or hear static or crackling, it may be caused by your network or reception. Give it another chance by calling at a later time or from a different place.
